24" LED Flex Strips (39 LED's), Multiple Colors Available, Sale on Blue

24" LED Flex Strips (39 LED's)

  These high intensity LED products are designed for light customizing, greater visibility to your vehicle.  Mount the whole 24" LED Flex Strip, or cut and mount anywhere you want or need more light. Perfect for Motorcycles, Campers, Trucks, Trailers, RV's, Golf Carts, Signage, Under Counter Lighting and more!

  A Low-Voltage, Flexible Linear Light Strip Made Of 39 High Intensity LED Lights Mounted On A Black PCB Flex Strip.  Available in 8 LED colors:  Amber, Blue, Green, Red, White, Purple, Orange & Teal!

  We have customized one of our own bikes with these lights (shown below). 
  This is positively the easiest light mod there is.  All you need to do now is hook up a fused power source and switch to power up your lights.  Then you can place the LED strips anywhere you want.  The jumpers come in different lengths with connectors on both ends, allowing you to keep connecting LED strips together very easily.  If wanting to daisy chain LED strips you just need to have at least 6 LED's per segment (there is a connector every third LED).  When you want to connect power to everything, just cut one of the connector ends off and hook power to the wires.  The connectors make it very easy to put LED lighting on Tanks, Panels, Trim Pieces or anything else that you might need to remove sometime, because the connectors just unplug from the LED Strip.  The jumpers also are covered with a protective black heat shrink, making them durable and unnoticeable.

  Each strip can be cut (where indicated by scissors), giving you up to 13 sections per Flex Strip.  The Flex Strip and or Sections can be bent at any angle to fit different needs.  Adhesive on the back of each strip for easy mounting!

PLEASE NOTE:
Wires and connectors are NOT INCLUDED with the Strips!!!   JUMPER & HOOK-UP WIRES sold separately.

Shown below on one of our bikes, a nine segment portion attached to the frame and hidden.  Jumpers are hooked to the segment powering the segment up and also jumpering to the next sement to power that one up also.

Water and Shock Resistant. 
Dimensions:  Length: 24" , Width: 1/2" 
Low Power Requirements:  12V DC, 1/2 Amp! 
One Year Limited Warranty!

EASY INSTALLATION:
- Cut the Flex Strip (where indicated) to desired lengths, up to 13 pieces. 
- Place each piece onto the chosen area with the adhesive on the back of each strip
- Connect Jumper Wires to each cut section (i.e.:  if you cut 1 Flex Strip into 2 pieces, you will need 2 Jumper Wires.  If you cut 1 Flex Strip into 3 pieces, you will need 3 Jumper Wires, etc.)  Jumpers are available in different sizes. 
- Attach to Hook-Up Wire (Red Wire to Ground, Black Wire to 12-Volt Power Source).

Additional Information