BackOFF XP Brake Light Signal Module

BackOFF XP Brake Light Signal Module

Create more visibility and conspicuity when you are stopped or stopping when you install the BackOFF-XP™.   Designed to work with LED lights.

This compact solid state electronic module converts your ordinary brake lights into your choice of two attention getting visual alerting signals when you apply your brakes:  

User Selected Mode One:
Emit a visual signal of 4 short light flashes, followed by 1 long light flash (3.5 seconds). The signal automatically repeats itself as long as the brakes are applied. This pattern is not random, but has been selected because of its ability to retain following drivers attention.

User Selected Mode Two:
Emit a visual signal of 5 short flashes, followed by a steady on light that remains steady on as long as the brakes are applied.

  Most states drivers handbooks recommend that you flash your brakes when slowing or stopping. The BackOFF-XP automatically facilitates compliance and enhances safety. Install the BackOFF-XP and see how much more effective your brake light can be.

Easy Installation.

Mode One Installation for - 3 Short Flashes / 1 Long Flash (Repeat):

Before you begin…make sure your brake lights are working properly!
Locate brake light wire (leading to the vehicles center brake light).
Cut and splice Module into brake light wire.  
Splice "Red Wire" from Module to wire leading from "Brake Light Switch". 
Splice "White Wire with Red Stripe" from Module to wire leading to the brake light.
Connect "Black Wire" to Ground.
Secure BackOFF XP Brake Light Signal Module with included double-sided adhesive tape.

Mode Two Installation for - 5 Quick Flashes & Steady On:

Before you begin…make sure your brake lights are working properly!
Locate brake light wire (leading to the vehicles center brake light).
Cut and splice Module into brake light wire. 
Splice "Red Wire" from Module to wire leading from "Brake Light Switch". 
Splice "Red Wire with White Stripe" from Module to wire leading to the brake light.
Connect "Black Wire" to Ground.
Secure BackOFF XP Brake Light Signal Module with included double-sided adhesive tape.

  Another wiring option is with a Duel LED license frame.  You can wire the top Brake LED to the Mode One output wire and the Bottom Brake LED to the Mode Two output wire.  This really gives a neat effect when the brakes are applied.  A jumper wire would need to be installed for the second License Frame LED to the BackOFF XP.

Features:
Easy Installation. - Simply install the BackOFF-XP™ Module in line with the brake light wire leading to the brake light and connect a ground wire.
Large power capacity: - 12 volts DC, Maximum Capacity 10 Amps!
Compact size. - 2-1/4"L x 1-5/8"W x 5/8"H
Sealed WeatherResistant heat sink case.
Limited Warranty -One Year!