USB Power Cord for Universal Applications

USB Power Cord for Universal Applications

This USB Power Port Cord will allow you to run any USB Accessory Device off of a 12 V Source (Bike / Sled / Etc).  Just plug your USB cords into this Outlet for Charging your electronics.  Great for use with all of your USB style charging cords.

This USB Port will charge any devise such as Phones, iPads, MP3 Players, eBooks and much more that takes a USB outlet to charge including your ChatterBox X1 Slim & Duo's with your 12 volt Motorcycle or Snowmobile battery.
Before using verify the switch on the Filter is turned on and Blue LED is illuminated.

This Cord has a filter and converter in it, taking your Bike Voltage to 5VDC. 
Hook up to your Battery, Hot Lead or a Fuse Block.  We suggest using an inline Fuse or Fuse Block during installation (3 Amp is fine).  See Fuse Blocks under related items below.
You need to install this Power Cord so the Filter with the switch is accessible and can be turned off and on.  Extending the leads so the filter can be located in a desired location is preferred.
If you are not going to use this for extended amounts of time, turn it off.  It will have very small amount .008 Amp (8 madc) of current draw all the time when turned on with nothing hooked to it charging.  A cell phone will pull about 1/4 Amp (250 madc) when charging.

Cable length:
Filter to power hook-up: 8"
Filter to USB Port:  30"

Click here for Installation Instructions that we have put together for the Accessory Fuse Blocks.