Mirror LED Turn Signals, Can Am Spyder RT 10-19 (pr)

Mirror LED Turn Signals (Smoked Tube), Can Am Spyder RT 10-19 (pr)

Visually see your blinkers when flashing and allows other motorist to see your flashers from the rear and the side for greater visibility.
These turn signals are mounted higher than your factory rear signals making it much more visible when the flashers are on. 

Specifically designed to fit the RT mirrors.  LED's are Very Bright with a continuous Amber LED Light.  We have these on our own RT.  Now even nicer looking in a Smoke Tube.
An alternate Install Location is shown on pictures above, wiring is the same.

You will really like these Smoked Tube Mirror LED's.
These LED Turn Signals are designed so discreetly that they just tuck up above the mirrors or below the mirror housing and taps into your mirror wires so there is no loose wires crossing over into the bike. 

All self contained in the mirrors.
Fits all Can Am RT's 10-19.
 
Very easy installation:
Simply pop off the mirror, UNPLUG it, LINE UP the LED on top edge of the mirror as shown in our pictures.
Then DRILL a small hole to pull wires through. 
DRILL a couple of small holes on the back housing to route your wires to the normal wiring. 
TIE into your wiring using taps provided.  We actually soldered our own.
RE-INSTALL the Mirror.

2014+ Fast Flash Reset.  The rapid blink is due to a change of load on the Spyder with additional lighting.  

Please follow these simple steps:

1. Turn key on
2. Press and hold the hazard button for 30 seconds
3. The cluster lights will flash confirming the calibration has been successful.
4. If this does not totally take care of it then turn the bike on and repeat steps 2 and 3.