Power Pod 2.0, 12 Volt Power Outlet

Power Pod, 12 Volt Power Outlet

Shown above with the optional 7/8" to 1" Handlebar Mounting Bracket.

The Formotion Power Pod is one of those goodies your friends are going to say "No Way! - That's a power outlet?"  It really is that cool.  What a treat to have a power source on-board.

Power Pod,  Just run the line (with an included in-line fuse) to your battery or accessory Fuse Block and you're done!  That's all it takes! 
Self grounding when mounted directly to the bikes metal.  Mounts using any bolt on the bike - up to .38 in diameter or to Handlebars or tube using an optional clamp.
Its universal mounting system insures it fits any bike or ATV!  Bolt it on and run the lead to your battery - and you're done!
Shown above with the optional 7/8" to 1" Handlebar Mounting Bracket.
 
You can even use this with one of our Engine Guard Clamps or P-Clamps, you just need a 3/8" Bolt to attach the clamp to the Power Pod Mounting Bar.

The Power Pod's Universal Mounting Bar attaches using two screws directly to the Power Pods outer chrome case.  A large slotted flange protrudes an inch below the Power Pod's  bottom allowing it to be mounted using any bolt on the bike. 
Use your imagination.  Install on your handlebars with the optional Handlebar Mounting Bracket (see related products below) or possibly use a Engine Guard or P-Clamp.  There are a lot of possible combinations for mounting on your bike.

Lid closes tight to ensure a water tight fit - In-line 20 amp fuse should anything go wrong.

• Super Strong Chrome molly Mounting Bar and Stainless Steel Fasteners
• Show Chromed Finish
• Beautiful All Steel Body
• Fully enclosed when shut - Waterproof!
• Hidden Power Port in the base accepts a standard 2 prong plug for easy connectivity for your trickle charger or heated clothing.
• 20 amp in-line fuse box included for added safety.
• All butt connectors included.
• Over 60 inches of hot line for easy battery routing no matter where it's mounted.
• Self Grounding when mounted to a metal surface.  Can be mounted to a non-metal surface (inside a saddle bag for instance) but a ground wire will have to be run and attached (not included)
• Dimensions:  4" L x 1 5/8" Dia.
  

These are show chrome and really sharp.