Le Bag, Plain or Studded Hard Bags

Le Bag Plain or Studded Hard Bags from Custom World

These Synthetic Leather and ABS hard bags are extremely high quality and mount solidly to your bike. 
These are really sharp and look good on just about any bike. 
For the money these are extremely nice bags, and have been one of our more popular items in the last few years. 
The material on these bags will look good and last for years. 

Features include:

• Exceptional Finish
• They always hold their shape
• Have an Extra Large Opening
• Protective rain covers are included
• Back of the Bags are designed to reduce the space between the bag and your fender
• Sold in Pairs
• We can get just a single bag if you were ever to need just one bag replaced. 
• 4 Elastic straps are on the inside of the top for securing your gloves, etc. 

Universal Mounting Hardware and Bolt Kits will fit all bikes that Custom World makes Backrest Mounting Hardware for with the exception of bikes listed below. 

You will get specific bolt kits for the following bikes.

• 1500 Mean Streak
• VL 1500
• Suz. M109R
• Ace 750
• Spirit 750,  (You will also Need Flasher Relocator Kit 01-201)
• Aero 750
• VTX 1800R / C / S / F
• VTX 1300R / S / C
• VStar 1100 CL and Custom
• VStar 650 CL and Custom
• Roadstar
• Roadliner
• VN 800 Custom and Classic
• VN 900 Classic
• VN 2000 / LTD / Classic, will not work with OEM passenger backrest

You will need to drill 4 holes in the bags after you mount the brackets.  The Hard Bags mount very solidly, and have a large opening.  The tops secure very tightly with velcro and require 2 hands to open.

18 Qt. Capacity
 8 1/2" wide / 11 1/2" deep / 18" long

These Hard Bags will mount on all bikes that Custom World makes Backrest Mounting Hardware for, with the exception of the Drifter models and 1400 / 800 Intruders.

Installation Instructions:

• Start on the right side making sure to leave 1.5" of clearance for the muffler.
• Mark where you need to drill and drill the front hole.
• Attach the front temporarily.
• Level the bag, mark and drill the rear hole, install temporarily to make sure the holes are ok.  Then remove.
• Now install the reinforcement bars by drilling the lower holes with the upper holes lined up.  Then install the front and back bars.
• The reinforcement bars are absolutely necessary.
• Repeat the previous steps on the left side making sure that the Swing Arm, Shaft Drive Belt, Belt Guard or Caliper doesn't contact the bag.
• The next step will be choosing which spacers are best for your bike so there is no contact anywhere.  You may use  more then one spacer on each bolt.  The large washer goes inside the bag. 
• Now you have to choose the correct length of bolt.  If the bolt is to long put spacers behind the head of the bolt inside the bags.

See Hardbags installed on a VTX 1300R

Shown below installed on our own Suzuki Boulevard C90.

Note:  For Priority Mail, 2nd Day or Next Day Air there will be a surcharge for Dimensional Weight.  Shipping charges at check out do not reflect dimensional weight surcharges.  This item is in a large box and does not weigh that much in proportion to the size of the box.