Edge / Ghost Brackets (Generation III) 106 Model for Larger Bags

Edge Brackets (Generation III) Formerly known as Ghost Brackets, 106 Model for Larger Bags
MSRP:  $154.95 - $169.95

106 Models are designed to work with bags 16" in Width or greater and should have a bag width of at least 15" at mounting point.  Recommended for medium or large saddlebags.  
Fits rails bolts from 4 1/2" to 10 3/8" center line to center line dimension.

For Smaller to Med. Bags, Choose 105 Models under related products below.

Some bikes only have one size Ghost Bracket Available.  If you do not see your bike listed in the drop down, then check the list for the 105 model.

If you have a Passenger Backrest, you will need the kit with 10mm longer bolts.  
If your Backrest Mounting Brackets are thicker then 10mm, then you may need to purchase longer bolts. 
Pick  your bike above and also choose With or Without Passenger Backrest.

If you are going to use the Edge Brackets in conjunction with Passenger Backrest Mounting Hardware (Sissy Bars), you will need to pick the kit above listed for your bike for installation with a Passenger Backrest. 
VTX Models with Hondaline Passenger Backrest Mounting Brackets will need special hardware.  Some other Bike Models also require different Bolts and Spacers if using Edge Brackets with an OEM Factory Backrest.  Let us know if this is what you have in notes on Check out.  We will verify correct fitment.
Passenger backrest bolt Kits may also be purchased separately shown below under related products.

Edge Brackets are a quick release saddlebag system that allows you to take off or even reinstall your saddlebags in seconds.
The Edge Brackets system is easy to install and once installed requires no tools to remove your saddlebags.
Edge Brackets are installed by removing the two bolts from your fenders and replacing the two bolts with the Edge Bracket bolts which are called "keepers".  The Edge Bracket is then bolted on to your saddlebag and simply slides right on to the keepers. Lock the key and away you go!
Edge Brackets are practically invisible when your saddlebags are off your motorcycle. 
EZ Carry handle are also available to carry both bags with one handle utilizing the Edge Bracket attached to each bag.
For use with flat surface mounting saddlebags only.

Patented design

Fast installation and removal

No tools required

Secure lockable system to keep your luggage safe

Your bike keeps a show room look while the bags are off

Completely adjustable system allows you to place your bags exactly where you want them on the bike

Bags can be moved from bike to bike with minor slider adjustment

Top quality design and fabrication with attention to every detail for a superior product

Helmet lock and Reflector removal required for VN 1600 and VN 2000 models.

Click Here For more information or to verify part numbers for a bike that we do not have listed.  If you would like Edge Brackets for a bike that you see listed on the Edge Brackets site, just let us know and we will get them for you.

Available for most Metric & HD Cruisers, more coming in the future.  Pick  you bike and Edge Bracket Size above.





Additional Information
See Edge Brackets with Edge Bags installed on our own bike.